Skip to content


SDARI Green Dolphin 63500dwt Ultramax Bulk Carrier

The Vessel to be designed and built as a single screw motor driven bulk carrier for normal worldwide grain in bulk or sack, coal, iron ore, steel coil and other dry cargoes. No deck cargo to be loaded. And the vessel is designed for

  • One complete flush upper deck with forecastle;
  • All accommodation including navigation bridge and propulsion machinery to be located aft;
  • The cargo area to have five(5) cargo holds with four(4) sets of single deck cranes;
  • Focus on Maximum deadweight, capacity and fuel energy efficiency with novel hull and energy saving device(Fan Duct&Fan Cap);
  • EEDI phase 3 compliance.

LR +100A1, Bulk Carrier, CSR, BC-A, hold Nos. 2 & 4 may be empty, GRAB [20], ShipRight (ACS(B), CM), ESP, *IWS, LI, ECO(EEDI-3,NO_X3), +LMC, UMS, BWTS, With the descriptive notes “ShipRight (BWMP (T), SCM, IHM, SERS)”

Or other class equivalent.

Length overall...Abt. 199.90 m
Length between perpendicular...196.50 m
Breadth(moulded)...32.26 m
Depth(moulded)...18.90 m
Draft(scantling)...13.50 m
Complement...25 persons
Gross tonnage...Abt. 35600
Net tonnage...Abt. 21100
Deadweight...63500 metric tonnes @ scantling draft
Service speed...13.5 kn @ scantling draft
Endurance...Abt. 18000 n.mile
Consumption...Main Engine Fuel consumption (Tier II SPC-off mode) is abt. 20.5 t/day
Energy saving device...Fan Duct & Fan Cap
Cargo hold(grain, including hatch coamings)...Abt.78000 m3
Heavy fuel oil tanks(including settling and service tank)...Abt.1600 m3
L.S.M.G.O tank(including service tank)...300 m3
Fresh water tanks...450 m3
Ballast water tank (excluding No.3 hold)...17500 m3
Ballast water tank (including No.3 hold)...33500 m3
Sewage holding tank...25 m3
Sludge tank...25 m3 (as large as possible)
Main engine...MAN 6G50ME-C9.6 (Tier III HP SCR & EGB)
CSR 5460kw x 79.9rpm
Generating set...3 x 650KW x 900r/min
Emergency Generator...1 x 120KW x 1800r/min
Composite Boiler...Oil fired section abt. 1500kg/h;
Exh. Gas section abt. 500kg/h
Purifier...Heavy fuel oil Abt.1750l/h(380 cst/50℃) x 2;
Lubricating oil purifier abt. 1400l/h(SAE30) x 2
Ballast water treatment...1x 1000M3/H(IMO USCG approved type (standard D-2) pressure loss)
Fresh water generator...Abt. 18t/d(Vacuum distilling, plate type using M/E jacket cooling fresh)
Oily bilge separator...5 m3/h, 15 ppm (IMO approved type, auto. discharge type with pump)
Sewage treatment plant...25P, biological chemistry type,
Combined windlass & Mooring Winches...Synthetic fiber rope drum:170kN (17.3 t) x 15m/min
Cargo crane...Electro-hydraulic, 30Tx28m x 4
Hatch cover...Folding type, no.1:16.02 m X18.26 m; no.2-5:21.36 m X18.26 m
  • Intelligent Management System;
  • Scrubber Ready;
  • Wind Propulsion System.